80 www.fluke.com/830 Alignment Fluke 830 Laser Shaft Alignment Tool The ideal test tool to precision-align rotating shafts in your facility The Fluke 830 Laser Shaft Alignment tool is easy-to-use, giving you fast, accurate and actionable answers that will keep your plant up and running. When it comes to laser shaft alignment, data is good but answers are better. Unlike using the straightedge method or dial indicators, the Fluke 830 performs the complicated alignment calculations for you, meaning you’ll have the answers you need to quickly align your machine and get your plant up and running fast. An enhanced user interface provides easy to understand results that don’t require extensive alignment knowledge, and the unique “All-in- One” result screen shows you both coupling results and feet corrections (vertical and horizontal) in real terms making it easy to take corrective action. • Single laser measurement technology means reduced errors from backlash resulting in better data accuracy • Intuitive guided user interface quickly and easily complete machine alignments • Compass measurement mode enables flexible, reliable and repeatable measurements using an active electronic inclinometer • Dynamic machine tolerance check provides continuous evaluation of alignment adjustments so you know when your machine is in the acceptable range • Unique extend mode handles gross misalignment by virtually increasing laser detector size • Data protection ensures your data is there when you need it with auto save and resume capability Specifications Computer CPU Intel XScale PXA270 running at 312 MHz Memory 64 MB RAM, 64 MB flash Display TFT, transmissive (sunlight-readable), 65,535 colors, backlit LED Resolution: 320 x 240 pixel; Dimensions: 89 mm (3.5 in) diagonal LED indicators Multicolor LED for laser status, alignment condition and battery status Power supply Integrated lithium-ion polymer rechargeable battery: 7.4 V/2.6 Ah External interface USB host and USB device (slave), integrated wireless communication, Class 1, transmitting power 100 mW, RS-232 (serial) for sensor, AC adapter/charger socket Environmental protection IP65 (dustproof, water spray resistant), shockproof, relative humidity 10 % to 90 % Sensor Measurement principle Coaxial, reflected laser beam Laser Type: Ga-Al-As semiconductor laser Wavelength (typical) 675 nm (red, visible) Safety class: Class 2, FDA 21 CFR 1000 and 1040 Beam power: < 1 mW Detector Measurement area: unlimited, dynamically extendible (U.S. Patent 6,040,903) Resolution: 1 μm; Accuracy (avg): > 98 % Inclinometer Measurement range: 0° to 360°; Resolution: 99 % Environmental protection IP67 (submersible, dustproof) Ordering information Models Included accessories FLUKE-830 Laser Shaft Alignment Tool Laser sensor, laser prism, chain-type mounting bracket with 150 mm support posts 2x, 300 mm support post 4x, micro fiber cleaning cloth, sensor cable, PC cable, USB drive, USB drive cable, tape measure, wireless Bluetooth® module, power adapter, instruction kit, and carrying case Rotate the shaft and receive instant measurement verification. ALIGNMENT TOOLS