Fluke Calibration Products and Services

Product highlights 8270A/8370A Modular Pressure Controllers/ Calibrators Widest workload coverage in an automated high- pressure controller The 8270A and 8370A are automated pneumatic pressure controllers that calibrate a wide workload of pressure sensors, covering twice the pressure ranges at twice the speed of other high-pressure controllers. Two models let you balance price and performance: • • The 8270A measures and con­ trols pressures from vacuum to 44 MPa (6400 psi). It can be configured with ranges as low as 100 kPa (15 psi). • • The 8370A measures and controls pressures from atmo- sphere to 107 MPa (15,500 psi). It can be configured with ranges as low as 700 kPa (100 psi). Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pressures, all in the same instrument. Control precision is 0.002 % of active range. Expand workload coverage to both gas and liquid filled devices by using the optional Contamination Prevention System (CPS). 6270A Modular Pressure Controller/Calibrator Calibrate a wide range of pressure gauges and sensors with a single instrument • • Modular configuration makes this a versatile and expandable solution • • Easy to operate and maintain • • Wide measurement range— vacuum to 3000 psi (20 MPa) • • Three levels of accuracy— 0.02 % FS, 0.01 % reading from 50 % to 100 % span, or 0.01 % reading from 30 % to 100 % span.—let you balance performance and budget • • High speed, stable pressure control • • Localized graphical user inter- face in choice of ten languages • • Can be fully automated with COMPASS® for Pressure software • • Optional contamination preven- tion system keeps valves clean and free from debris 2271A Industrial Pressure Calibrator The complete pneumatic pressure calibrator that grows along with your workload for wide workload coverage now and in the future The 2271A Industrial Pressure Calibrator provides a complete, automated solution for calibrat- ing a wide variety of pressure gauges and sensors. Thanks to its modular design, it can be config- ured to meet different needs and budgets, and expanded to cover a broad workload. • • Calibrate a wide range of gauges and sensors with a single instrument • • Wide measurement range from -100 kPa to 20 MPa (-15 psi to 3,000 psi) • • Removable pressure measure- ment modules make it easy to change or add measurement ranges • • Integrated electrical mea- surement module provides a complete solution for calibrat- ing pressure transmitters • • Built-in dual test ports enable you to connect multiple units under test (UUTs) • • 0.02 % FS pressure measure- ment uncertainty • • Localized graphical user inter- face in choice of ten languages www.flukecal.com 29 Pressure calibration