Fluke Calibration Products and Services

PG9607/ PG9602 OPG1 700HPPK MPG2 GPC1 National Metrology Institute piston gauges PG9607 Gas Piston Gauge Fully automated primary pressure reference for absolute and gauge pressures to 500 kPa. • • Gauge and absolute pressures from 11 kPa to 500 kPa with a single piston-cylinder • • Large diameter 50 mm piston- cylinder with improved geom- etry allows direct traceability to dimensional measurements with very low uncertainties PG9602 Gas Piston Gauge Fully automated primary pressure reference for absolute and gauge pressures to 11 MPa. • • Gauge and absolute pressures from 10 kPa to 11 MPa • • Up to 100 kg mass load under vacuum bell jar for large turndown and overlap of piston-cylinder ranges Manual pressure generation and control 3990 Gas Pressure Control Pack Precise, manual absolute and gauge pressure control for gas piston gauges and indicators. • • Models from vacuum to 7 MPa and 20 MPa (1,000 psi and 3,000 psi) • • Self-contained for intuitive, easy use GPC1 High Gas Pressure Controller Precise, assisted manual control for high pressure gas piston gauges and indicators. • • Models to 70 MPa and 110 MPa (10 k psi and 16 k psi) • • Precise control to full pressure with simple, ergonomic push- button operation MPG2 Hydraulic Pressure Generator/Controller Precise, manual control for hydraulic piston gauges and indicators. • • Models to 100 MPa and 200 MPa (15 k psi and 30 k psi) • • Self-contained for intuitive and easy generation and precise control to full pressure OPG1 Hydraulic Pressure Generator/Controller Precise, assisted manual control for hydraulic piston gauges and indicators. • • Pressure to 200 MPa (30 k psi) • • Precise generation and control to full pressure with simple, ergonomic push-button 3990 700HPPK Pneumatic Test Pump Kit Generate 21 MPa (3,000 psi) easily in the field, without liquid contamination or the hazard of a pressurized gas cylinder • • Generate and adjust pneumatic pressures up to 21 MPa (3,000 psi) • • Rugged, portable and stable enough to go anywhere—on any surface • • Reaches pressure in 20 seconds to full scale into a 30 cm 3 volume • • Detachable pressure adjust- ment system for adjusting pressure, connecting reference and test devices on bench and in the field, and isolating and venting pressure www.flukecal.com 35 Pressure calibration