Fluke Calibration Products and Services

molbox1+ molboc-L molbloc-S molstic-L molstic-S MFC Switchbox molbox RFM MFC-CB™ Gas flow standards molbox1+ Flow Terminal 0.125 % of reading—lowest uncer- tainty for gas flow calibration. • • Allows coverage of flow range from less than 1 sccm to over 5000 slm with a single user interface and transportable system • • Real-time flow measurements makes adjusting analog flow devices fast and easy • • Perform fully-automated flow calibrations using molbox terminal with COMPASS for Flow software • • Updated design molboc-L Laminar Flow Element Laminar flow elements for flow from 1 sccm to 100 slm. • • Traceable to primary gravimet- ric mass flow measurements • • Multiple gases supported • • Useable with existing molbox1+ and molbox RFM mass flow ter- minals and COMPASS software • • Integrated filter to protect against contamination • • Integral gas temperature conditioning and measurement • • No moving parts that cause pressure/flow fluctuations or threaten reliability molbloc-S Sonic Nozzle Flow Element Sonic nozzle based molblocs for gas flow up to 5,000 slm. • • Covers ranges up to 5,000 slm in N2 and air • • Multiple gases supported • • Useable with molbox1+, or existing molbox1 and molbox RFM mass flow terminals and COMPASS software • • Proven critical flow ven- turi (sonic) nozzle operating principle traceable to primary gravimetric flow measurements molbox RFM Reference Flow Monitor Compact terminal for making mass flow measurements using molbloc- L and molbloc-S flow elements. • • Economical alternative to molbox1+ terminal • • ± 0.5 % of reading uncertainty • • Covers the flow range of 1 sccm to 100 slm with molbloc-L, and up to 5,000 slm with molbloc-S • • 5141/5142/5144 kits feature molbox RFM, molbloc-L and other hardware for a complete calibration system • • No moving parts that cause pressure/flow fluctuations or threaten reliability molstic Mounting Systems Used to conveniently mount and protect molbloc elements, connect to units under test and provide flow and pressure control. molstic-L used for molboc-L mass flow elements. • • Quick connector input • • 2 micron (0.5 micron for low flow) filter to protect the downstream components • • Adjustable regulator protects the molbox transducers molstic-S used for molbloc-S mass flow elements. • • Available in 1/2 inch or 1/4 inch system plumbing sizes • • Integrated flow shut-off/ metering valves Gas Flow Automation Accessories MFC-CB™ Control Box Stand-alone unit for setting/read- ing analog mass flow controllers (MFCs) and mass flow meters (MFMs). • • Set and read 0 to 5 V or 4 to 20 mA on two (2) channels • • Complete front panel local control and remote operation via RS-232 and IEEE-488 interfaces MFC Switchbox ™ Supplies power and switches between up to five MFCs or MFMs on one molbox1+ or MFC-CB channel. • • Duplicates MFC channel without switching cables 40 www.flukecal.com Gas flow calibration