Fluke Calibration Products and Services

6105A/6100B 52120A 7526A 5322A 6135A/PMU 5725A 6003A 52120A Transconductance Amplifier Test and calibrate power stan- dards, power and energy meters, PQ analyzers, high-current clamp meters and Rogowski coils. Delivers: • • 120 A stand-alone • • 240 A or 360 A with parallel operation • • 3000 A or 6000 A with accessory coils • • Industry-leading amplifier accuracy: – – 100 PPM dc to 850 Hz – – 120 PPM dc and 260 PPM ac in stand-alone operation • • Frequency capability, dc to 10 kHz 7526A Precision Process Calibrator Best balance of economy and accuracy for calibration of tem- perature and pressure process measurement instrumentation. • • Sources and measures dc voltage, current, resistance • • Measures and simulates RTDs and thermocouples • • Measures pressure using Fluke 750 Series pressure modules • • Includes 24 V dc loop power supply, automated switch-test function and measures 4 mA to 20 mA Specialty calibrators 6105A/6100B Electrical Power Standards The most accurate, comprehen- sive and flexible sources of electrical power quality and energy signals. • • Power calibration with voltage to 1008 V and current to 21 amps, and optionally up to 80 amps • • Voltage and current accuracies better than 0.005 % (50 ppm) • • Current to voltage phase accuracy of 0.003 ° • • Programmable harmonic distortion up to 100 harmonics • • Includes other power quality testing phenomena • • Complex measurements gener- ating a wide variety of signals 5725A Amplifier The Fluke 5725A Amplifier is a companion to the 57XX Series calibrators. • • Extends the calibrators’ alternating volt-hertz product to 1100 V at 30 kHz and 750 V at 100 kHz • • Increases maximum direct and alternating current to 11 A 6003A Three Phase Electrical Power Calibrator Three power phases in a single easy-to-use instrument. • • Cost effective • • Easy to use • • Simulates dc or ac electrical power and energy in voltage range to 600 ac V or 280 dc V and current range to 30 A per phase or 90 A combined • • Phase shift between voltage and current channels can be set from 0° to 359.99° 6135A/PMU Phasor Measurement Unit Calibrator Fast, automated, IEEE C37 118.1-2011-compliant PMU calibrations. System includes: • • PMU control unit • • GPS receiver • • PMU test and calibration software • • Fluke 6135 Electrical Power Standard • • Configured server PC 5322A Electrical Safety Tester Calibrator Calibrate all major types of elec- trical safety testers with just one calibrator • • Calibrate insulation resistance testers; leakage current testers; multifunction installation tes- ters; portable appliance testers (PATs); continuity testers, earth (ground) resistance testers and many more types of electrical safety testers • • Complies with new regula- tory standards up to four times faster than traditional methods • • Compatible with MET/CAL software www.flukecal.com Electrical calibration 6