Process Calibration Tools Catalog EN

Suggested test tools Temperature switch and controller testing at the bench 9142, 9143, 9144 Field MetrologyWells See pg 17 6102 Micro-Bath Thermometer Calibrator See pg 19 7103 Micro-Bath Thermometer Calibrator See pg 19 6109A/7109A Micro-Bath See pg 19 A temperature switch is a device that protects a thermal system by sensing temperature and closing or opening a switch to shut down a process or equipment if the temperature is outside the safe range. Temperature switches are often calibrated or tested for safety reasons to determine how accurate and repeatable the device is. The temperature at which a switch activates is called the set point and is an important value that needs to be verified during testing. Another critical safety related value is called the deadband. Below the low end of the deadband, the heating system turns on. Above the high end of the deadband, the heating system turns off. Switch tests may be operated manually or automatically. If the electronics are not built into the dry-well for a switch test, then a DMM will be needed to determine the open/ close condition. MetrologyWells and most Field MetrologyWells have built-in routines to automate switch testing. 56 Temperature Applications