It looks like you’re in need of our Earth Ground Clamp Meter

Best match

Fluke 355
Where to buy
 

Best match

    
     
 

Fluke 1630-2 FC

    
Electrical specifications      
Maximum voltage to earth ground 1000V    
Battery type 4 x 1.5 V AA alkaline IEC/EN LR6    
Battery life More than 15 hours*    
Frequency range 40 Hz to 1 kHz    
Ingress protection IEC/EN 60529: IP30 with jaw closed    
LCD - Digital reading 9999 counts    
LCD - Refresh rate 4/s    
Operating temperature -10 °C to +50 °C (14 °F to +122 °F)    
Storage temperature -20 °C to +60 °C (-4 °F to +140 °F)    
Operating humidity Non condensing (<10 °C) (< 50 °F)
≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F])
≤75 % RH (at 30 °C to 40 °C [86 °F to 104 °F])
≤45 % RH (at 40 °C to 50 °C [104 °F to 122 °F]) (Non condensing)
Operating altitude 2000 m (6561 ft.)    
Storage altitude 12,000 m (39370 ft.)    
Reference temperature 23 °C ±5 °C (73 °F ±9 °F)    
Temperature coefficient 0.15 % X (specified accuracy)/ °C (<18 °C or >28 °C ([<64.4 °F or >82.4 °F])    
Overload indication OL    
Downloads      
Datasheet Download    
     
Where to buy    

Fluke 1630 Earth Ground Clamp Meter

Safely measures ground loop resistance

The Fluke 1630 Earth Ground Clamp Meter is able to measure ground loop resistances—using the stakeless testing method. This test technique eliminates the dangerous, and time consuming activity, of disconnecting parallel grounds. You can also perform earth ground tests: inside buildings, on power pylons or anywhere you don’t have access to soil. With the stakeless testing method, no earth ground stakes are used at all. A known voltage is induced by one half of the clamp and the current is measured by the other half. The tester automatically determines the ground loop resistance at this grounding connection.

  • Quick and easy use—no earth ground stakes are necessary
  • Large, 35 mm (1.35 in) jaw opening
  • Measures ground resistance from 0.025 Ω to 1500 Ω
  • Measures ground leakage current from 0.2 mA to 30 A
  • High and low alarming
  • Automatic self calibration
  • Rugged carrying case and resistance check loop included
  • Two-year warranty
  • CAT III 300 V, CAT II 600