Best match |
|---|
![]() |
Fluke 789 |
| Download datasheet |
| Buy Now |
Best match |
Top related
|
||||||
|---|---|---|---|---|---|---|---|
Fluke 789 |
Fluke 787 |
||||||
![]() |
![]() |
||||||
| Buy Now | Buy Now | ||||||
| Features | |||||||
| 1000 V, 440 mA True-RMS | • | • | |||||
| 0.1% dc voltage accuracy | • | • | |||||
| 0.05% dc current accuracy | • | • | |||||
| Frequency measurement to 20 kHz | • | • | |||||
| Min/Max/Average/Hold/Relative modes | • | • | |||||
| Diode Test and Continuity Beeper | • | • | |||||
| Simultaneous mA and % of scale readout | • | • | |||||
| 20 mA DC current source / loop calibrator /simulator | • | • | |||||
| Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp | • | • | |||||
| Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards | • | • | |||||
| Unique new wireless measurement logging capability | • | ||||||
| Temperature measurement from -200 °C to 1372 °C using the t3000 FC | • | ||||||
| 24 V Loop power supply | • | ||||||
| HART mode setting with loop power (adds 250 ohm resistor) | • | ||||||
| 1200 ohm drive capability on mA source | • | ||||||
| Enhanced backlight with two brightness settings | • | ||||||
| 0 % to 100 % mA Span Check buttons to toggle between 4 and 20 mA | • | ||||||
| Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 | • | ||||||
| Externally accessible fuses for easy replacement | • | ||||||
| Downloads | |||||||
| Datasheet | Download | ||||||
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect™, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.