141 / 164
137
805 Vibration Meter
Vibration meter
Low frequency range (overall measurement)
10 Hz to 1,000 Hz
High frequency range (CF+ measurement)
4,000 Hz to 20,000 Hz
Severity levels
Good, Satisfactory, Unsatisfactory, Unacceptable
Vibration limit
50 g peak (100 g peak-peak)
A/D converter
16-bit
Signal to noise ratio
80 dB
Sampling rate
Low frequency
20,000 Hz
High frequency
80,000 Hz
Sensor
Sensitivity
100 mV / g ± 10%
Resolution
0.01 g
Accuracy
At 100 Hz ± 5 % of measured value
Amplitude units
Acceleration
g, m/sec
2
Velocity
in/sec, mm/sec
Displacement
mils, mm
Infrared thermometer
Range
-20 °C to 200 °C
Accuracy
±2 °C
Environmental
IP rating
IP54
Drop test
1 meter
Specifications
Make go or no-go maintenance decisions
with confidence. The Fluke 805 Vibration
Meter is the most reliable vibration
screening device available for frontline
mechanical troubleshooting teams
that need repeatable, severity scaled
readings of overall vibration and bearing
condition.
What makes the Fluke 805 the most
reliable vibration screening device
available?
• Innovative sensor and sensor tip
design helps minimize measurement
variations caused by device angle or
contact pressure
• Four-level severity scale assesses
urgency of problems for overall
vibration and bearing condition
• Exportable data via USB
• Trending in Excel using built-in
templates
• Overall vibration measurement
(10 Hz to 1,000 Hz) for acceleration,
velocity and displacement units of
measurement for a wide variety of
machines
• Crest Factor+ feature provides reliable
bearing assessment using direct sensor
tip measurements between 4,000 Hz
and 20,000 Hz
• Temperature measurement with
Spot IR Sensor increases diagnostic
capabilities
• On-board memory holds and saves up
to 3,500 measurements
• Audio output for listening to bearing
tones directly
• External accelerometer support for hard
to reach locations
• Flashlight for viewing measurement
locations in dark areas
The reliable, repeatable, accurate way to
check bearings and overall vibration.
Complete set 805 with suitcase, belt holster,
manual on CD and quick reference guide
TrendPlot made with MS Excel template
Included Accessories
USB cable, Storage case, Belt holster, Quick
reference guide, CD-ROM (includes MS Excel
template and documentation), Two (2) AA
batteries
Ordering Information
Fluke 805
Vibration Tester
Battery type:
AA (2) Alkaline or Lithium-ion 2V dc
Size (HxWxD):
162 x 257 x 98 mm
Weight:
0.40 kg
1 Year Warranty
Fluke 805