157
Fuse and Warranty Information
A
V
IR
Size
in mm
Part nr
qty 1
63mA (slow)
250V
6.35x32
163030
125mA (slow)
250V
6.35x32
166488
250mA (slow)
250V
6.35x32
166306
315 mA
1000V
10KA
6.35x32
2279339
440mA
1000V
10kA
10.3x34.9
943121
500mA
250V
1500A
5x20
838151
630mA
250V
1500A
5x20
740670
1A
600V
10kA
10.3x34.9
830828
1A
500V
50kA
6.35x 32
2530449
1.25A
600V
6.35x32
2040349
3.15A
500V
6.35x32
2030852
11A
1000V
17kA
Replaced by 11A, 1000V, 20kA fuse; 803293
11A
1000V
20kA
10.3x38.1
803293
15A
600V
100kA
10.3x38.1
892583
20A
600V
Replaced by 15A, 600V, 100kA fuse; part nr. 892583
See the back of your Fluke test tool or user manual for the fuses installed.
For manuals check the Fluke website in the product section.
For Fuse Replacement Guide check the Fluke website in the service section.
Fuse Replacement Information
Product Warranty
Service
Each Fluke product is warranted to be free from defects
in material and workmanship under normal use and
service, for the warranty period listed unless local law
requires a longer period. The warranty period is listed
in the ordering information section of the product
specification and begins on the date of shipment.
This warranty extends only to the original buyer or
end-user customer of a Fluke authorized reseller, and
does not apply to fuses, disposable batteries or to any
product which, in Fluke’s opinion, has been misused,
altered, neglected or damaged by accident or abnormal
conditions of operation or handling. Fluke warrants that
software will operate substantially in accordance with its
functional specifications for 90 days and that it has been
properly recorded on non-defective media. Fluke does
not warrant that software will be error free or operate
without interruption.
Lifetime Warranty
Each Fluke 20, 70, 80, 170, 180 and 280 Series DMM
purchased after October 1, 1996 will be free from defects
in material and workmanship for its lifetime. This
warranty does not cover fuses, disposable batteries and
damage from accident, neglect, contamination, misuse or
abnormal conditions of operation or handling, including
overvoltage failures caused by use outside the DMM’s
specified rating, or normal wear and tear of mechanical
components. This warranty covers the original purchaser
only and is not transferable. For ten years from the
date of purchase, this warranty also covers the LCD.
Thereafter, for the lifetime of the DMM, Fluke will replace
the LCD for a fee based on then current component
acquisition costs.
To establish original ownership and prove date of
purchase, please complete and return the registration
card accompanying the product.
Fluke will, at its discretion, repair at no charge, replace
or refund the purchase price of a defective product
purchased through a Fluke authorized sales outlet and at
the applicable international price. Fluke reserves the right
to charge for importation costs of repair/replacement
parts if product purchased in one country is sent for
repair elsewhere.
Send defective product with a description of the
problem to the nearest Fluke Authorized Service Center,
postage and insurance prepaid. Fluke will pay return
transportation for product repaired or replaced in-
warranty. Before making any non-warranty repair, Fluke
will estimate cost and obtain authorization, then invoice
you for repair and return transportation.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING
LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
AUTHORIZED RESELLERS ARE NOT AUTHORIZED TO
EXTEND ANY DIFFERENT WARRANTY ON FLUKE’S
BEHALF.
Since some states do not allow the exclusion or
limitation of an implied warranty or of incidental or
consequential damages, this limitation of liability may
not apply to you.