134 / 164
130
705/707/707Ex/715
Loop Calibrators
T PAK (715)
See page 155
Fluke 705
TP920
See page 144
TL220-1
See page 145
C25 (715)
See page 152
C12A (705/707)
See page 152
Functions
Voltage measurement
705/707/707 Ex
715
Range
0-28 V DC
0-200 mV, 0-20 V
Resolution
1 mV
10 μV 1 mV
Accuracy
705: 0.025% Rdg + 2 LSD
707/707Ex: 0.015% Rdg + 2 LSD
0.01% Rdg + 2 LSD
Specifications
Fluke 705, 707, 707Ex
Maximum voltage:
30 V (28 V - 707Ex)
Operating temperature:
-10 to 55°C
Safety:
CSA C22.2 No. 1010.1: 1992
EMC: EN50082-1:1992 and EN55022: 1994 Class B
Size (HxWxD):
164 mm x 75 mm x 47 mm;
Weight:
0.35 kg
Battery:
One 9 V alkaline
Battery life:
18 hours typical, at 12 mA
Three Year Warranty
Fluke 715
715
Size (HxWxD):
201 mm x 98 mm x 52 mm
Weight:
0.6 kg
Battery:
One 9V alkaline
Battery life:
4 to 20 hours
Three Year Warranty
705 Loop Calibrator
• Simultaneous mA and %
• mA accuracy of 0.02%
• Measure, source and simulate mA
• Push button 25% steps for fast, easy
linearity checks
• “Span Check” for fast confirmation of
zero and span
• Selectable slow ramp, fast ramp, and
step function
• 24 volt internal loop supply
• 0 - 20 mA or 4 - 20 mA default start up
modes
707 Loop Calibrator
• Features of the Fluke 705
• “Quick Click” detented rotary knob for
one handed operation
• Higher accuracy: 0.015%
• Mains Voltage Input protection
• 250 Ohm loop resistance for with Hart
instrumentation
715 Volt/mA Calibrator
• Measure loop current (0-20 mA,
4-20 mA) signals with 0.015% accuracy
and 0.001 mA resolution
• Measure voltage output process signals
from PLCs, transmitters
• Source or simulate 24 mA loop current
• Source voltage to 100 mV or 10 V
• 24 V loop supply with simultaneous
current measurement
707Ex Intrinsically Safe Loop
Calibrator
• Same features as Fluke 707
• For use in explosion endangered areas
• ATEX certified ( II 2 G Eex ia IIC T4)
4-20 mA, source, measure, simulate
Fluke 707
Fluke 707Ex
Current sourcing
Range
0-20 mA or 4-20 mA
1
0-20 mA or 4-20 mA
1
Accuracy
705: 0.025% Rdg + 2 LSD
707/707Ex: 0.015% Rdg + 2 LSD
0.015% + 2 LSD
Drive capability
705: 1000 Ω @ 24 mA
707: 1200 Ω @ 24 mA
707Ex: 700 Ω 20 mA
1000 Ω @ 24 mA
Loop power while measuring mA
24 V
24 V
Voltage sourcing
N/A
0-100 mV or 0-10 V
Display current and % of span
Yes
mA or %
Auto step, auto ramp
Yes
Yes
Span Check
Yes
Yes
Current measurement
Range
0-24 mA
0-24 mA
Resolution
0.001 mA
0.001 mA
Accuracy
705: 0.025% Rdg + 2 LSD
707/707Ex: 0.015% Rdg + 2 LSD
0.015%
Included Accessories
Fluke 705/707:
C10 Yellow Holster, Test Leads,
AC175 Alligator Clips, Single 9V alkaline
battery, Instruction Sheet
Fluke 707Ex:
Red Ex-holster, Test Leads, AC175
Alligator Clips, Single 9V alkaline battery,
Instruction Sheet
Fluke 715:
Yellow Holster (H80M excl. TPAK),
Test Leads and AC175 Alligator Clips, Single 9V
alkaline battery, Instruction Sheet
Ordering Information
Fluke 705
Loop Calibrator
Fluke 707
Loop Calibrator
Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715 Volt/mA Calibrator
1
will over-range to 24 mA
Recommended Accessories
(Not for hazardous zones)