54 PROCESS TOOLS SELECTION GUIDE Models Process mA Clamp Meter ProcessMeter® Test Tool Loop Calibrator Pressure Calibrator Temperature Calibrator Precision Multifunction Process Calibrator Intrinsically Safe Calibrator Documenting Process Calibrator 773 789 709H 719/719PRO 724 726 725Ex 754 Measure V dc 30 V 1000 V 30 V 30 V 30 V 30 V 300 V V ac (true-rms) 1000 V 300 V Resistance 40 MΩ 3200 Ω 4000 Ω 3200 Ω 11 kΩ A dc max 20.99, 99.9 mA 30 mA, 1 A 24 mA 24 mA 24 mA 24 mA 24 mA 110 mA A ac max • Frequency 20 kHz 15 kHz 10 kHz 50 kHz Pressure 2 bar, 10 bar, 20 bar •1 •3 •1 Temperature: RTDs 719Pro optional 7 types 8 types 7 types 8 types Temperature: TCs 12 types 13 types 12 types 13 types Source/Simulate V dc 10 V 10 V 20 V 10 V 15 V Resistance 3200 Ω 4000 Ω 3200 Ω 11 kΩ mA dc 24 mA 24 mA 24 mA 24 mA 24 mA 24 mA 22 mA mA source; auto step, auto ramp • • • • • • • Frequency 15 kHz 10 kHz 50 kHz Temperature: RTDs 7 types 8 types 7 types 8 types Temperature: TCs 12 types 13 types 12 types 13 types Record Min/Max • • • Hold • • 719 • As found/As left results • Log data • • Upload data to PC • • Remote operation • • Features 24 V loop supply • • • • • • 12 V 26 V Non-contact mA measurement • HART communication • • Intrinsically safe (ATEX) • Traceable calibration certification • • • • • • Pressure enabled2 • • •3 • Warranty (years) 3 3 3 3 3 3 3 3 1Fluke 750P Pressure Modules required. 2Fluke Process Calibrators in this guide displaying the Pressure Enabled symbol display readings from the 750P Series Pressure Modules. 3Fluke 700PEx Pressure Module required. Model 914X/ 9190A P3000 152X 9103/ 9140 418X 1620A P5500 3130 2700G 1586A Range –95 °C to 660 °C To 400 MPa (60,000 psi) –200 °C to 420 °C –25 °C to 350 °C –15 °C to 500 °C 0 °C to 50 °C; 0 % to 100 % RH To 70 MPa (20,000 psi) Vacuum to 20 bar -0.1 to 70 MPa (-15 to 10,000 psi) Various Measure Temperature • • • • • • Pressure • • • Humidity • DC volt/ current • • Source Temperature • • Pressure • • • • Thermocouple