83 Vibration www.fluke.com/vibration Fluke 805 FC Vibration Meter Forget the pens. Think METER. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams who need repeatable, severity-scaled readings of overall vibration and bearing condition. • 5 tools in 1: Overall vibration, bearing impacting, temperature, machine health severity, and bearing health severity • Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect® • Four-level severity scale assesses urgency of vibration problems • Vibration measurement for acceleration, velocity, and displacement units of measurement • Colored lighting system (green, red) and on- screen comments indicate how much pressure needs to be applied to take measurements • Non-contact temperature measurement increases machine health screening capabilities • External accelerometer support for hard to reach locations Specifications Vibration meter Low frequency range (overall measurement) 10 Hz to 1,000 Hz High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz Severity levels Good, Satisfactory, Unsatisfactory, Unacceptable Vibration limit 50 g peak (100 g peak-peak) A/D converter 16-bit Sampling rate Low frequency: 20,000 Hz; high frequency: 80,000 Hz Sensor Sensitivity 100 mV/g ± 10 % Measurement range 0.01 g to 50 g Low frequency range (overall measurement) 10 Hz to 1,000 Hz High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz Resolution 0.01 g Accuracy At 100 Hz ± 5 % of measured value Amplitude units Acceleration g, m/sec2 Velocity in/sec, mm/sec Displacement mils, mm Infrared thermometer (temperature measurement) Range -20 °C to 200 °C (-4 °F to 392 °F) Accuracy ± 2 °C (4 °F) Focal length Fixed, at ~3.8 cm (1.5 in) Environmental IP rating IP54 Drop test 1 meter What is Crest Factor+? Crest Factor (CF) is used to identify bearing faults and is the ratio of the peak value/RMS value of a time domain vibration signal. As the bearing condition worsens, the CF+ value increases. Fluke has also included a four-level severity scale that identifies the bearing health. More than an overall vibration meter— 5 tools in 1 1. Low frequency vibration meter 2. High frequency vibration meter (bearings) 3. IR temperature meter 4. Machine health screening tool (37 machine categories) 5. Bearing health screening tool Ordering information Models Includes FLUKE-805 FC Vibration Meter USB cable, storage case, belt holster, quick reference guide, (includes MS Excel template and documentation), and two AA batteries FLUKE-805ES External Sensor External vibration sensor with threaded mounting bolt, removable “U” shaped magnet mount, and 2.1336 m (7 ft) coiled cable VIBRATION TOOLS