www.fluke.com/accessory 91 Accessories 80TK Thermocouple Module • Converts type K thermocouple signals into mV output • Connects to DMM via standard banana plugs • Switch selectable °C or °F • Range: -50 °C to 1000 °C (-58 °F to 1832 °F) • Includes 80PK-1 probe 80T-150UA Universal Solid State Temperature Probe • For measurement of air, surface and non-corrosive materials • Measurement range: -50 °C to 150 °C (-58 °F to 302 °F) • Output: 1 mV/°C or 1 mV/°F (switch selectable) • Connects to DMM via standard banana plugs 80PK-8, 80PK-10, Pipe Clamp Temperature Probes • Type K thermo- couples clamp securely onto pipes for fast tempera- ture and superheat measurements • Durable ribbon sensors • 1 m (39 in) lead • Measure from -29 °C to 149 °C • 80PK-8 for 6.4 mm to 34.9 mm (0.25 in to 1.375 in) • 80PK-10 for 32 mm to 64 mm (1.25 in to 2.5 in) Fluke temperature accessories Turn your digital multimeter into a thermometer BP7240 • Li-ion rechargeable battery; nominal 7.2 volt, 4400 mA hr • Use with 750 Series Calibrators BP7235 • NiMH rechargeable battery; nominal 7.2 volt, 3500 mA hr • Use in 700 and 740 Series Calibrators 700LTP-1 Low Pressure Test Pump Hand operated pressure pump designed to generate either vacuum to -13 psi/ -.90 bar or pressures to 100 psi/6.9 bar. Ideal for low pressure applications requiring accurate low pressure testing. 700ILF In-line Filter The Fluke 700ILF can be used to isolate the calibrator from incidental contact with fluids. Particularly useful with the 718 calibrator to help keep moisture or oils from contami- nating the on-board pump. 700PTP-1 Pneumatic Test Pump The Fluke 700PTP is a hand- held pressure pump designed to generate either vacuum to -11.6 psi/-0.8 bar or pressure to 600 psi/40 bar. Thermocouple Plug Kits 700TC1 A kit of ten mini-plug connectors. One each of the following: Type J (black) Type K (yellow) Type T (blue) Type E (purple) Type R/S (green) Type B or Cu (white) Type L (J-DIN) (blue) Type U (T-DIN) (brown) Type C (red) Type N (orange) 700TC2 A kit of seven mini-plug connectors. Type J (black), two Type K (yellow), two Type E (purple), one Type T (blue), one Type R/S (green), one Other temperature accessories 80PK-18, Pipe Clamp Temperature Probe Kit • Includes both 80PK-8 and 80PK-10 Type K clamps • Provides full range of pipe measurement sizes • Includes soft carrying case to conve- niently keep both clamps handy for any situation 80CK-M and 80CJ-M Type K and J Male Mini-Connectors • Isothermal screw ter- minal for K or J wire • Suitable for up to 20 gauge thermocouple wire • Color coded to industry standards (K-yellow, J-black) • Two per package 80PJ-EXT, 80PK-EXT, 80PT-EXT Thermocouple Wire Extension Kits For extending and repairing type J, K or T thermocouple wires. • Kit includes 3 m (9 ft) of thermo- couple wire and 1 pair of male/female mini-connectors • Maximum con- tinuous exposure temperature: 260 °C (500 °F) • 80PK-EXT is compat- ible with type K thermometers; 80PJ- EXT is designed for type J thermometers, and 80PT-EXT is designed for type T thermometers Process tools accessories 700HTP-2 Hydraulic Test Pump The Fluke 700HTP is designed to generate pres- sures up to 10,000 psi/ 700 bar. Use the Fluke 700PRV adjustable relief valves to limit pressures from 94 bar (1360 psi) to 376 bar (5450 psi) 700HTH-1 Hydraulic Test Hose The 700HTH is a 10,000 psi, 700 bar test hose that connects to a calibration unit under test from a Fluke 700HTP hydraulic test pump. 700PMP Pressure Pump The 700PMP is a hand- operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT. Fluke 700-IV Current Shunt Conversion factor: 10 mV = 1 mA Accuracy (% of input, one-year): 0.025 % Input current: 0 mA to 55 mA Input resistance: 250 Ω nominal Output resistance: 10 Ω nominal Accuracy specification applies from +18 °C and 28 °C to 50 °C Maximum input voltage: 30 V dc