125 / 164
121
750 Series Documenting
Process Calibrators
700P27
See page 132
Recommended Accessories
Included Accessories
Stackable test leads (3 sets), TP220 test probes
(3 sets) with extended tooth alligator clips
(3 sets), AC280 hook clips (2 sets), BP7240
Li-ion battery pack, BC7240 battery charger,
C799 field soft case, USB communication
cable, getting started guide, instruction
manual on CDROM, NIST traceable certificate
of calibration, DPCTrack™ 2 sample
software that enables upload and printing
of calibration records. HART communication
cable (754 only).
Ordering Information
Fluke 753
Documenting Process Calibrator
Fluke 754
Documenting Process Calibrator
700 TLK
Process test lead kit
BP7240
753/754 Spare battery
750 SW
DPC/Track2
BC7240
753/754 Battery charger/eliminator
754HCC
754 HART communication cable
80PK-25
See page 150
80PK-8
See page 150
TL220-1
See page 145
C799
See page 152
Function
Measure
Sourcing
Voltage DC
0.02% + 0.005 mV
0.01% + 0.005 mV
Current DC
0.01% + 5 μA
0.01% + 0.003 mA
Resistance
0.05% reading + 50 mΩ
0.01% output + 10 mΩ
Frequency
0.05 Hz
0.01 Hz
Thermocouples
0.3ºC
0.2ºC
RTDs
0.07 ºC
0.06 ºC
Pressure
To 0.05% of full scale. See Pressure Module specifications.
Specifications
(Check the Fluke web for detailed specifications)
Operating temperature:
-10º C to 50º C
Storage temperature:
-20º C to 60º C
Safety:
CAT II 300V
Battery Life:
Typically over eight hours
Internal Battery Pack:
li-ion, 7.2V, 4400 mAh,
30 Wh
Fluke 754
Fluke 753
Battery Replacement:
Via snap-shut door
without opening calibrator; no tools required
Weight:
1.2 kg
Size (HxWxD):
245 mm x 136 mm x 63 mm
Three Year Warranty
Whether you’re calibrating instruments,
troubleshooting a problem or running
routine maintenance, Fluke 750 series
process calibrators can help you get the
job done faster. It does so many different
tasks, so quickly and so well, it’s the only
process calibrator you need to carry.
• Measure volts, mA, RTDs,
thermocouples, frequency, and ohms
to test sensors, transmitters and other
instruments
• Source/simulate volts, mA,
thermocouples , RTDs, frequency, ohms,
and pressure to calibrate transmitters
• Power transmitters during test using
loop supply with simultaneous mA
measurement
• Measure/source pressure using any of
29 Fluke pressure modules
• Measure and source simultaneously
with one compact, rugged, reliable tool
• Create and run automated as-found/
as-left procedures to satisfy quality
programs or regulations. Record and
document results
• Advanced features like autostep,
custom units, user entered values
during test, one-point and two-point
switch testing, square root DP flow
testing, programmable measurement
delay and more
• Control the temperature of selected
Hart Scientific Dry Blocks
• Handle fast pulsed RTD transmitters
and PLCs in RTD source mode with
1 ms response time
• English, French, German, Italian, and
Spanish languages
• Three-year warranty
753: A complete documenting
calibrator
The 753 Documenting Process Calibrator
automates calibration procedures and
captures your data. Use the PC interface
for downloading procedures, lists, and
instructions to the 753 and for uploading
data for printing, archiving and analysis.
754: Get HART-ability
The 754 offers all of the capabilities
of the 753, plus integrated HART
communication capability. This rugged,
reliable tool is ideal for calibrating,
maintaining, and troubleshooting HART
and other instrumentation.
Instrumentation Management
Software
The Fluke 753 and 754 are compatible
with Fluke 700SW DPC/TRACK software
and with software from Cornerstone,
Fisher-Rosemont, Honeywell, Yokogawa,
Prime Technologies and On Time Support.
Work smarter. Work faster